Technical Information Synthetic Enamel

Technical Information Synthetic Enamel

DUPLI-COLOR Synthetic-resin enamal varnish is a high glossy top on base of alkyd-resin that is suitable for indoor- and outdoor-applications. It is also shock-, weather- and impact-resistant. Easy to use, has a good flow with high covering capaticy and longlasting gloss stability. Suitable surfaces are wood (e.g. doors, furniture, fences, gates), metal (iron, zinc), mineral surfaces (e.g. walls, concrete, plaster) and coatable plastics; even suitable for coloured radiators with a flow temperature of +80°C. 

Quality and properties

  • Ease of use
  • Good flow with high covering power
  • Durable gloss stability 
  • Based on alkyd-resin 
  • Usable for indoor and outdoor applications  
  • Shock- and impact-resistant
  • Good weather-resistance

Physical and chemical data

  • Basis of the binder: Based on alkyd-resin
  • Colour: various 
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy
  • Efficiency:
    ca. 75 ml per m² 
    that means per 250 ml can: 2.5 - 3 m² 
    per 750 ml can: 7.5 - 9 m² 
  • Drying time (at 20°C, 65% relative air humidity):
    Surface-dry after approx. 6 hours
    Coatable after 24 hours
    The drying time depends on surrounding temperature, air humidity and absorpitivity of the wooden ground. ? 
  • Cleaning of tools: immediately after use with a brushcleaner
  • Storage stability:
    5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. 
    Do not store below 5°C
  • Size: metal tins 250 ml and 750 ml 

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Preparation of the ground:

  • The surface has to be bearing, dry, clean and free from fat and rust.
  • Remove old flaking paintings which are not bearing.
  • Equal small fissures and bumps with a suitable putty.
  • Prime rough wood with wood impregnating ground.
  • Pretreat iron and steel with rust-protection-primer.
  • Thoroughly Clean zinc and galvanised surfaces with zinccleaner or household-cleaner with salmiakgeist.
  • Basic coat
    Wood: with DUPLI-COLOR Wood Primer
    Metal: with DUPLI-COLOR Rust protection primer

Painting:

  • Before application, always carefully stir up the paint
  • Temperature of the object and surrounding temperature should be at least +5°C
  • Brush, roll or spray (adjust to spray viscosity)
  • Intermediate coat and final coat with this product with max. 3% synthetic thinner.
  • Before you apply a final coat, slightly sand and clean the ground.

 

 

Order information

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Examples for use

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of March 23, 2018
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Hier kunt u gestileerde muurschilderingen in blad-patroon maken. De truc: de bladen worden niet geschilderd maar erop gespoten met stencil...

Meer lezen

Veroudering, weersinvloeden en andere invloeden kunnen ervoor zorgen dat de kunststof van de koplampen geleidelijk aan mat en onzuiver wordt. Met...

Meer lezen