Technical Information BOB Combi Pack

Quality and properties

Rust Sealing (no. 1)

  • Quick, simple and safe application
  • Hardens and isolates rusted surfaces
  • Prevents further corrosion of the treated parts
  • Surface remains slightly sticky

Rust Protection Primer (no. 2)

  • Rust-protective effect
  • Excellent adhesion
  • Can be coated with lacquer

 

Physical and chemical data

  • Basis:
    Rust Sealing: moisture curing polyurethanes
    Rust Protection Primer: combinaton binder
  • Colour:
    Rust Sealing: transparent, yellowish
    Rust Protection Primer: grey, matt
  • Smell: solvent
  • Temperature resistance: up to 120°C
  • Working temperature:
    Rust Sealing: min. +15°C
    Rust Protection Primer: +5°C - +30°C
  • Drying time (at 20°C, 50% relative air humidity):
    presto BOB Rust Sealing can be coated with presto BOB Rust Protection Primer earliest after 8 hours, latest after 24 hours drying time.
    After approx. 2 hours the presto BOB Rust Protection Primer can be coated with any customary lacquer system.
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Efficiency:
    Depending on consistence and color of the ground:
    2 x  20 ml are sufficient for approx. 0.2 m²
    2 x 100 ml are sufficient for approx. 1.0 m²
  • Storage stability:
    36 months if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: Combi Pack with 2 x 20 ml resp. 2 x 100 ml

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application

  • Please consider: Do not dilute the BOB Rust Sealing.
  • Where appropriate, fill minor quantities in a smaller container to avoid that soiling or humidity let dry the material in the original can.
  • Do not apply the presto BOB Rust Sealing during temperatures lower than + 15°C.

  • Remove loose flakes of rust, subsurface rusted paints, dirt and fat.
  • Generously apply the presto BOB Rust Sealing on dry or even on damp surface.
  • Coat with presto BOB Rust Protection Primer earliest after 8 hours, but latest after 34hours drying time, at best in 2 coats.
  • After approx. 2 hours drying time it is possible to finish coating with most of the customary lacquers.
  • Clean tools immediately with an nitro or universal thinner.
 

Bestellangaben

 Color   Product   Bundle   Art.No. 
 presto Rostv. Kombipack 200ml   200 ml   603871 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

Stand: 23.03.2011
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

Kreative Ostereier

Rost, Crackle oder Marble? Wir sprühen für Ostern! Wie jedes Jahr zum Osterfest wollen wir mit Eiern dekorieren. Diesmal wird mit den...

Read more

The ideal and inexpensive way to repair high-strength and heat-resistant metal links with presto adhesive steel.

 

Also suitable for use on: ...

Read more