Technical Information Sheet Inox Spray

Technical Information Sheet Inox Spray

Ideally suitable for sealing welding-seams and -spots at inert gas and spot welding. At spot welding between auto body sheets it protects against corrosion. ColorMatic Inox Spray is a high-quality corrosion protection but also a surface coating. Re-sprayable with all common paint systems.

Application:
Ideal at industrial applications.

Quality and properties

  • Weldable
  • Good corrosion prevention at using between auto body sheets at spot welding
  • Excellent coverage
  • Very good flow
  • Quick-drying
  • Very hard surface
  • Excellent resistance to weathering
  • Re-coatable with commercial coatings

Physikalische und chemische Daten

  • Basis of the binder: Polyvinylbutyral
  • Colour: grey
  • Smell: solvent
  • Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 1.0 m²
  • Drying time (at 20°C, 50% relative air humidity):
    30-40 minutes
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 250°C
  • Storage stability:
    Aerosols: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosoldosen, maximales Nennvolumen 400 ml
  • VOC-value: < 268,0 g/l

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application

  • Bring the can to room temperature
  • The area must be dry and free of dust and grease
  • Sand if necessary
  • Shake can vigorously for 2 minutes
  • Carry out spray test
  • 2-3 coats with intermediate drying of approx. 3-5 minutes
  • Don't use polyester products afterwards

  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)
Technical Information Sheet Inox Spray
2 min
Technical Information Sheet Inox Spray
20 cm
Technical Information Sheet Inox Spray
20°C=
30-40 min
Technical Information Sheet Inox Spray
approx. 1 m²
Technical Information Sheet Inox Spray
 

Order information

 Color   Product   Bundle   Art.No. 
 CM Inox Spray 400   400 ml   375347 
printing preview/further products

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Sheet Inox Spray
Technical Information Sheet Inox Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of May 10, 2016
This release replaces all eventually earlier issued versions.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

Tischdeko und passendes Outfit

Dosen, Plastikbecher und Dekoteilchen werden für das nächste Spiel mit den Nationalfarben Schwarz, Rot und Gelb aus der Serie platinum von DUPLI-COLOR...

Read more

Aging, weather influences and other conditions can make that the plastic of headlamps by and by will be matt and unclear. Only with a little effort...

Read more